BPYNB - EXTERIOR TRIM ENAMEL BLACK 27038(LEAD AND C
- MSDS: BPYNB
- Manufacturer: FARWEST PAINT MANUFACTURING CO
- Product Name: EXTERIOR TRIM ENAMEL BLACK 27038(LEAD AND C
- National Stock Number: 8010-01-333-7766
Product Identification
Product ID:EXTERIOR TRIM ENAMEL BLACK 27038(LEAD AND C
MSDS Date:03/23/1992
FSC:8010
NIIN:01-333-7766
MSDS Number: BPYNB
Responsible Party
TUKWILA, WA 98168
US
Emergency Phone: 206-941-1619
Info Phone: 206-244-8844
Cage: 2F266
Contractor
Telephone: 206-244-8844
Cage: 2F266
Ingredients
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 4.0%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TEXANOL (ESTER ALCOHOL)
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: 2.0%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
62 GRAMS/LITER
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: PROLONGED, IN CONFINED
AREAS MAY LEAD TO MUCOUS MEMBRANE IRRITATION, DIZZINESS, HEADACHE.
SKIN: IRRITATION OF SKIN. EYE: IRRITATION OF EYES. INGESTION:
AMOUNTS INGESTED INCIDENTAL TO CONSU MER & INDUSTRIAL HANDLING NOT
LIKELY TOCAUSE INJURY, HOWEVER, INGESTION OF LARGER AMOUNTS COULD
CAUSE SERIOUS INJURY.
Explanation of Carcinogenicity:THIS PRODUCT CONTAINS NO KNOWN
CARCINOGENS IN REPORTABLE QUANTITIES AS DEFINED BY NTP, IARC, OSHA,
OR EPA.
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING INSTRUCTIONS. SEE SAFE HANDLING AND USE INFORMATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. IF RESPIRATORY SYMPTOMS
DEVELOP, SEEK MEDICAL ATTENTION AT ONCE. SKIN: WASH OFF QUICKLY
WITH PLENTY OF WATER, THEN SOAP & WATER. REMOVE & WASH CONTAMINATED
CLOTHING BE FORE REUSE. EYE: FLUSH IMMEDIATELY WITHLARGE AMOUNTS OF
WATER, ESPECIALLY UNDER LIDS FOR AT LEAST 15 MIN. OBTAIN EMERGENCY
MEDICAL TREATMENT. INGESTION: IF SWALLOWED, OBTAIN MED TREATMENT
IMMEDIATELY
Fire Fighting
Extinguishing Media:FOAM, DRY CHEMICAL, WATER, OR WATER FOG.
Fire Fighting Procedures:WATER MAY BE USED TO COOL AND PROTECT EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:WILL NOT BURN, CLOSED CONTAINERS MAY
BURST IF EXPOSED TO EXTREME HEAT OR FIRE.
Accidental Release
Spill Release Procedures:COMPLY WITH ALL APPLICABLE HEALTH AND
ENVIRONMENTAL REGULATIONS. VENTILATE AREA. SPILLS MAY BE COLLECTED
WITH ABSORBENT MATERIALS.
Handling
Handling and Storage Precautions:AVOID TEMPERATUERS BELOW 40F. KEEP
FROM FREEZING. STORE CONTAINERS WITH LIDS TIGHTLY CLOSED AND
APPROPRIATELY LABELED.
Other Precautions:USE ONLY WITH ADEQUATE VENTILATION. AVOID BREATHING
VAPOR AND SPRAY MIST. AVOID CONTACT WITH SKIN AND EYES.
Exposure Controls
Respiratory Protection:IF PERSONAL EXPOSURE CANNOT BE CONTROLLED BELOW
APPLICABLE LIMITS BY VENTILATION, WEAR A PROPERLY FITTED ORGANIC
VAPOR/PARTICULATE RESPIRATOR APPROVED BY NIOSH/OSHA FOR PROTECTION
AGAINST MATERIALS IN INGREDIENTS.
Ventilation:LOCAL EXHAUST PREFERABLE. GENERAL EXHAUST ACCEPTABLE IF
EXPOSURE TO MAT'L IS MAINTAINED BELOW TLV/PEL.
Protective Gloves:WEAR GLOVES RECOMM BY GLOVE SUPPLIER.
Eye Protection:SFTY SPECTACLES W/UNPERFORATED SIDESHLDS
Other Protective Equipment:EYE WASH, SAFETY SHOWERS.
Work Hygienic Practices:KEEP WORK AREA CLEAN AND FREE FROM SPILLS AND
LEAKS. ALWAYS WASH HANDS W/SOAP & WATER BEFORE HANDLING
FOOD/DRINK/SMOKING
Supplemental Safety and Health
NOTE: THIS PRODUCT CONTAINS NO MERCURY IN REPORTABLE QUANTITIES AS
DEFINED BY OSHA AND EPA.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:23.8 @ 25C
Vapor Density:> AIR
Spec Gravity:9 TO 11 LBS/GAL
pH:7-8
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INFINITE
Appearance and Odor:THIXOTROPIC LIQUID WITH SLIGHT ODOR; COLOR OF TINT.
Percent Volatiles by Volume:7.5
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS AND/OR HYDROFLUORIC ACID.
Stability Condition to Avoid:ELEVATED TEMPERATURES, CONTACT WITH
OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES, CONTACT WITH
OXIDIZING AGENTS.
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS. AVOID DISCHARGE TO NATURAL WATERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.